Single-silver Low-E Insulated Glass
Balanced Performance for Mainstream Projects
Single-silver Low-E Insulated Glass features two silver layers within the Low-E coating. The coating typically consists of 9–11 layers in total. This product is a popular choice for commercial buildings and high-end residential projects because it provides a good balance between thermal performance and cost. It offers better thermal performance than single-silver Low-E glass. The SHGC can be reduced from approximately 0.50 for single-silver Low-E glass to around 0.35–0.40. In summer, the lower solar heat gain can help reduce the amount of heat entering the building and can significantly reduce cooling loads. It also provides improved thermal insulation, with a K-value of approximately 1.2–1.4. In winter, it helps reduce heat loss and can improve overall building energy efficiency. Compared with single-silver Low-E glass, it can provide 15%–20% greater energy savings under comparable conditions. Its high light-to-solar gain ratio provides good daylighting while helping control solar heat gain. The typical appearance is light blue or light gray, with outside reflectance of approximately 12%–16%. This relatively low reflectance helps reduce exterior glare and reflection.
Quality Production with a Ten-Year Warranty
We produce double-silver Low-E glass for commercial and residential applications. Our production line uses advanced equipment and trained production staff. We follow applicable national standards and ISO-based quality management procedures to maintain consistent product quality. Our insulating glass products are subject to controlled production and inspection processes. We provide a ten-year warranty for our insulating glass products. Our Single-silver Low-E Insulated Glass is widely used in large commercial buildings, office buildings, high-end residential projects, curtain walls, and energy-efficient window systems. Its combination of thermal performance, solar control, daylighting, and cost efficiency makes it a practical option for a wide range of architectural projects. We can also provide customized sizes and configurations based on your drawings and project requirements.
Key Technical Data at a Glance
|
Parameter |
Specification |
|
Low-E Type |
Double silver (9–11 coating layers) |
|
K-Value (Heat Transfer) |
1.2–1.4 |
|
SHGC Value |
0.35–0.40 |
|
Color Appearance |
Light blue or light gray |
|
Outside Reflectance |
12%–16% |
|
Maximum Size |
Depends on project drawings and models |
Hot Tags: single-silver low-e insulated glass, China single-silver low-e insulated glass manufacturers, suppliers, factory, Curved Insulated Glass, Double Silver Low E Insulated Glass, Flat Insulated Glass, Single Silver Low E Insulated Glass, Triple Glazed Insulating Glass Unit, Triple Silver Low E Insulated Glass

